How to Install and Hang Your Neon Sign Safely
Introduction
You’ve designed your perfect neon sign — now it’s time to hang it! Whether you’re placing it above your bed, in your storefront window, or at an event, it’s important to install your sign the right way for safety and longevity.
At USA Neon Sign, we make installation as simple as possible. This guide will walk you through how to safely install and hang your custom LED neon sign using the most common methods.
What Comes in the Box
Every USA Neon Sign sign arrives with everything you need to get started:
- Your custom LED neon sign
- Power adapter + plug
- Pre-drilled holes in the acrylic backing
- Mounting hardware (typically screws, spacers, or stand-off bolts)
- Optional: dimmer switch, remote, or hanging chain depending on your order
Always inspect your package and test your sign before installing to make sure everything works correctly!
How to Hang Your Neon Sign: 3 Popular Methods
1. Wall Mount with Screws or Stand-Offs (Most Secure)
Best for: Long-term indoor installs (walls, storefronts, bedrooms, businesses)
Steps:
- Hold the sign in place and mark where each pre-drilled hole lands on the wall.
- Drill small pilot holes for the screws.
- Insert wall anchors (if needed), then use the included screws and spacers to secure the sign to the wall.
- Plug it in and light it up!
Pro tip: Use a level to keep your sign straight before marking holes.
2. Command Hooks or Strips (No-Drill Option)
Best for: Temporary displays, rentals, dorm rooms, events
- Use heavy-duty Command strips or hooks on smooth, clean walls.
- Place hooks through the pre-drilled holes or along the acrylic edge.
- Be sure to check the weight limit of the strips you're using — most 2S Neon signs are lightweight enough for this method, especially smaller sizes.
Not ideal for textured walls or outdoor use.
3. Hanging Chains or Ceiling Hooks
Best for: Hanging in windows, over photo booths, or suspended from ceilings
- Your sign will come with attached hanging hardware and chains (if requested).
- Install ceiling hooks or wall-mounted brackets and clip the chain on.
- Make sure it's balanced and not swinging — tension keeps it looking clean.
Great for wedding backdrops, booth displays, or salon installs.
Powering Your Neon Sign Safely
- Plug your sign into a standard outlet using the included power adapter.
- If you’re using a dimmer switch or remote, connect it between the adapter and the sign.
- Avoid using extension cords unless they are properly rated and safe.
- For permanent installs, you may want to hide the cord behind furniture or along the wall using cord covers.
Extra Safety Tips
- Never submerge or expose the sign to direct water unless it’s an outdoor-rated sign.
- Use only the provided adapter — using a random one could cause damage or short-circuiting.
- Don’t hang your sign directly above a heat source (like a fireplace or stove).
- If you're unsure about hardwiring or hanging from certain surfaces, consult a professional installer.
Where to Hang Your Sign
Looking for placement inspiration? Try:
- Above your bed or desk
- In your storefront window
- On an accent wall for photo ops
- At the center of your party or event setup
- Behind your reception desk or register
Wherever it goes, your neon sign is going to steal the spotlight!
Let USA Neon Sign Help You Glow with Confidence
At USA Neon Sign, we make signs that are not just beautiful — they’re safe, lightweight, and easy to hang. Whether it’s your first time or you’re a seasoned sign-lover, we’re always here to answer your questions and guide you through the setup process.
Need help with installation or placement tips? Just ask — we’re happy to help you shine.